Guangzhou Hotworld Electronic Technology Development Co., Ltd.
Main products:RAM,keyboard,Mouse,motherboard,hard disk
Products
Contact Us
  • Contact Person : Mr. C Tim
  • Company Name : Guangzhou Hotworld Electronic Technology Development Co., Ltd.
  • Tel : 86-20-62235847
  • Fax : 86-20-62235848
  • Address : Guangdong,Guangzhou,Tianhe Road,Tianhe district
  • Country/Region : China
  • Zip : 510285

2013 silicone rubber insulated and fiberglass wire cable

2013 silicone rubber insulated and fiberglass wire cable
Product Detailed
UL/VDE/CSA/CCC certified; heat resistant rubber cable; fiberglass braided wire. fast shipping excellent quality and reas

2013 silicone rubber insulated and fiberglass wire cable

This product is suitable for linking the household electrical appliance, small electric tools, instruments and power lighting devices with the rated A.C. voltage equal or less than 450/750V. The type, description and applications of the products are listed in the following table. The operating temperature of the wire is 90°C for the type of BV-90 and RV-90, 70°C for the other types.Type description and main applications for the wire

Type

Description

Main application

KVV 7*1.5MMRVV 5*0.75MM

PV1-F 4MM

ZR-BVV 2.5MM

ZR-BV 2.5MM

Copper/Aluminum core PVC insulated cable

wire fixed and distribute

ZR-VV 1*300

Copper/Aluminum core PVC insulated sheath  flat cylinder soft wires

FYJV 3*120+1*70

Copper/Aluminum core PVC insulated sheath flat soft wires

vv 3*150

PVC insulated soft wires with copper core

RVV 3*2.5MMBVV 10MMWDZ-BYJ(F) 4MM

PVC insulated soft wires with copper core

Suitable for medium or light type movable electrical appliances, instruments, household electrical appliances, power lighting, etc, that need soft area when working.

BVR 2.5MM

light type PVC insulation sheathed soft wires

NH-BV 2.5MM

Common PVC insulation sheathed soft wires

RVVP

Copper-core PVC insulation sheathed shield soft wires.

Suitable for the connection of electric appliances instruments electric equipments and automatic devices with the rated voltage of 300/300V or below.

ApplicationsIt applies to electrical appliances, instruments and telecom devices at a rated voltage up to 450/750 volts.The main features of the flame retardant PVC cable or wire are hard to get fire or that the continuous burning of cables is limited when it is on fire. It applies to the places with special demands for flame retardant property. Flame retardant cable is classified as Class A, Class B and Class C. Among the 3 classes, Class A is the best.Fire-resistance cable can operate normally for some time when it is burning, apart from that it can transmit electrical power under normal condition. It is used in the places with special demands for fire resistance property. Fire resistance cable has two classes like A and B. Clients can select one as their practical needs.The main characteristic is low smoke and halogen. Flame retardant cables are low smoke emission and low release of HCL gas besides the property of flame retardant. It can be used in the places with special demands for the density of smoke emission and the release value of HCL gas when the cable gets burning.

Main features of cables (wires)1 Rated voltage U0/U is 450/750 volt, 300/500volt or 300/300 volt.2 Permissible continuous operating temperature of cables are:——for type of cable RV-105 and BV-105, less than 105°C.——for the others, less than 70°C.3 Ambient temperature should be not less than 0°C, and permissible bending radius of cables for fixed connecting should be as follows during installation:——for O.D. less than 25mm, equal to or greater 4 times O.D.——for O.D. more than 25mm, equal to or greater 6 times O.D.4 Flame retardant cables should pass the test of bunched cables or wires under fire conditions which are described in the standards of GB1266.5-90 or IEC332-3.

5 Fire resistance cables should pass the test of fire resistance stipulated in the standards of GB1266.6-90 or IEC331.6 Low smoke, low halogen, flame retardant cables should pass the test of flame retardant described in GB12666.5-90 or IEC 332-3. Furthermore, its optic-penetrated rate shall be not less than 35 percent, while the release value of HCL gas not larger than 100mg/g.

Technical SpecificationsBLV, ZRBLV, 227IEC01(BV), 227IEC05(BV)    300/500V, 450/750V

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v0/767326451_1/2013_silicone_rubber_insulated_and_fiberglass_wire.jpg' , 'http://i01.i.aliimg.com/photo/v0/767326451_2/2013_silicone_rubber_insulated_and_fiberglass_wire.jpg' , 'http://i01.i.aliimg.com/photo/v0/767326451_3/2013_silicone_rubber_insulated_and_fiberglass_wire.jpg' , 'http://i01.i.aliimg.com/photo/v0/767326451_4/2013_silicone_rubber_insulated_and_fiberglass_wire.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); 2013 silicone rubber insulated and fiberglass wire cable



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.